Music System Owner's Manual

“Transmit Dialog”

Voice data can be transmitted in bulk to your synthesizer. Select the bulk voice data you wish to

receive, then click [Start]. The progress bar shows how much of the data has been transmitted.

Finally, click the [Close] button to quit the dialog.

n When transmitting user voice data to the MOTIF-RACK, user voice data in the MOTIF-RACK will be

overwritten. Exercise caution so as not to accidentally overwrite a User voice that you have used in

another Multi conﬁguration.

n When the User Voice of any given part is already selected, transmit the Multi settings to the MOTIF-

RACK after you bulk transmit the User Voice data. By transmitting the Multi settings you can play the

MOTIF-RACK the newly transmitted voice data.

n Transmission time can be set under “Dump Interval” on the “Setup dialog” (page 31).

1 Transmit Type .................. Click this and select which user voice data to transmit to the MOTIF-

RACK.

Normal User 1+2+Drum ......... All Normal User 1, 2 voices and Drum voices

Normal User 1 ........................ All Normal User 1 voices

Normal User 2 ........................ All Normal User 2 voices

Normal User 1+2 .................... All Normal User 1, 2 voices

Drum User .............................. All Drum User voices

n Voice data for optional plug-in boards can not be transmitted.

2 Progress Bar...................Indicates how much of the data has been transmitted.

3 Start ................................ Click this to begin the transmission. Once transmission has started,

this button changes to a [Stop] button. Clicking [Stop] will stop the

transmission.

4 Close...............................Click this to close this dialog.

n The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see

page 31.