Installation Instructions
TOOLS for MOTIF ES6/MOTIF ES7/MOTIF ES8 Installation Guide
5
Installing the driver on Windows 2000
1
Start the computer and use the “Administrator” account to log into
Windows 2000.
2
Select [My Computer | Control Panel | System | Hardware | Driver Signing |
File Signature Verification], and check the radio button to the left of “Ignore
-Install all files, regardless of file signature” and click [OK].
3
Insert the included CD-ROM into the CD-ROM drive.
4
First, make sure the POWER switch on the MOTIF ES is set to OFF, then
use a USB cable to connect the USB connector of the computer (or the USB
hub) to the USB TO HOST connector of the MOTIF ES. When the MOTIF
ES is turned on, the computer automatically displays the “Found New
Hardware Wizard.” Click [Next].
5
Check the radio button to the left of “Search for a suitable driver for my
device. (Recommended).” Click [Next].
The window that appears enables you to select a location in which to install
the driver.
6
Check the “CD-ROM drives” box and uncheck all other items. Click [Next].
n
The system may ask you to insert a Windows CD-ROM while it checks for the
driver. Specify the “USBdrv2k_” directory of the CD-ROM drive (such as
D:\USBdrv2k_\) and continue the installation.
7
When the installation is complete, the system displays “Completing the
Found New Hardware Wizard.” Click [Finish].
n
Some computers may take about ten seconds to show this screen after the
installation is complete.
8
Restart the computer.
The driver has been installed.
Installing the driver on Windows XP
1
Start the computer.
2
Select [Start]
→
[Control Panel].
If the control panel appears as “Pick a category”, click “Switch to Classic
View” in the upper left of the window.
All control panels and icons will be displayed.
3
Go to [System]
→
[Hardware]
→
[Driver Signing]
→
[File Signature
Verification], and check the radio button to the left of “Ignore -Install all
files, regardless of file signature” and click [OK].
4
Click the [OK] button to close System Properties, and then click “X” in the
upper right of the window to close the Control Panel.
5
Insert the included CD-ROM into the CD-ROM drive.
6
First, make sure the POWER switch on the MOTIF ES is set to OFF, then
use a USB cable to connect the USB connector of the computer (or the USB
hub) to the USB TO HOST connector of the MOTIF ES. When the MOTIF
ES is turned on, the computer automatically displays the “Found New
Hardware Wizard.”
n
Some computers may take a few minutes to show this screen.
7
Check the radio button to the left of “Install the software automatically
(Recommended).” Click [Next].
The system starts the installation.
8
When the installation is complete, the system displays “Completing the
Found New Hardware Wizard.” Click [Finish].
n
Some computers may take about a few minutes to show this screen after the
installation is complete.
9
Restart the computer.
The driver has been installed.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SQ01 V2
In the procedure of installing the SQ01 V2, you can also install the Voice Editor
for MOTIF ES 6/7/8, Multi Part Editor for MOTIF ES 6/7/8, and Wave Editor
TWE together as plug-in software of the SQ01 V2.
1 Double-click on the “SQ01_” folder.
Various files including “setup.exe” will be displayed.
2 Double-click on “Setup.exe.”
SQ01 Setup Dialog box will be displayed.
3 Execute the installation by following the directions appearing on the screen.
After the installation, select “Restart”. After restarting Windows, you will
find the YAMAHA folder on your PC (Program Files as the default) and
SQ01 folder in the YAMAHA folder.
Refer to the online manuals for instructions on how to use the application.
SQ01 V2 MIDI Setup
1 Start the SQ01 V2.
Choose [Programs] from the [Start] menu, then select [YAMAHA
SQ01 Ver.2.0] → [SQ01].
2 From the [Setup] menu (Track View window), select [MIDI]
→[Device], to call up the “Device” page of the “MIDI” dialog.
3 Select the appropriate output port (for example, “YAMAHA USB
OUT 0-1”) in the [OUT] box, to use the USB connection with the
MOTIF ES.
4 Select the appropriate input port (for example, “YAMAHA USB IN
0-1”) in the [IN] box, then click [OK] to close the dialog box.
n
You can select the audio driver and the audio in/out device if necessary. From the
[Setup] menu, select [Audio]
→ [Device] to call up the “Device” page of the
“Audio” dialog.
nThe USB connection to the MOTIF ES can only be used for transfer of MIDI data.
No audio data can be transferred via USB.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Voice Editor and Multi Part Editor
Once you‘ve installed these software programs, you can use your computer to
edit the Voices and Mixing settings of the MOTIF ES.
1 Double-click on the “Tools” folder in the CD-ROM.
The “VEMOTES_” and “MEMOTES_” folders will be displayed.
2 Double-click on the “VEMOTES_” folder or “MEMOTES_” folder.
“setup.exe” file will be displayed.
3 Double-click on the “setup.exe” file.
The Voice Editor or the Multi Part Editor Tools setup dialog will be
displayed.
4 Execute the installation by following the on-screen directions.
For details, refer to the each on-line Help or the each PDF owner’s manual.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TWE (using as a stand-alone software)
In the procedure of installing the SQ01 V2, you can also install the TWE, which
enables you to edit the wave data directly on your computer, as plug-in software
of the SQ01 V2. If you wish to install the TWE alone, follow the instructions
below.
1 Double-click on the “Twe_” folder.
2 Select the language that you want to use and double-click “setup.exe”.
3 Execute the installation by following the on-screen instructions.
For details on operation, refer to the PDF manual provided in the folder.
English