User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
81
Reference
EQ 1 Q (2-band EQ1 Q)/EQ 2 Q (2-band EQ2 Q)
Determines the EQ bandwidth for the frequency which is set in “EQ 1 Freq/EQ2 Freq.” This is available
only when “EQ Type” is set to “Peak/Dip.”
Settings: 0.1–12.0
NOTE For details on EQ structure, see the Synthesizer Parameter Manual PDF document.
Output Level (2-band Output Level)
Determines the Output level of the 2-band EQ.
Settings: -12dB – +12dB
In the Insertion Assign display, you can set the Insertion Effect for Parts 9–16.
Active (Active Part)
Shows the number of Parts with the Ins FX SW set to ON. The number that follows the slash (/) sign is the
maximum number of Insertion Effects that can be simultaneously set to ON.
Part9–Part16
Sets the Insertion Effect for Parts 9-16 ON or OFF.
Settings: Off, On
NOTE The Insertion Effect for Parts 1–8 is always ON.
Ins Assign (Insertion Assign)
Operation
[PERFORMANCE (HOME)]  [EDIT]  Part selection  Element [Common]  [Effect] 
[Ins Assign]