User Manual
Table Of Contents
- System Requirements
- Installation
- Installing Speaker Data
- Uninstalling
- Table of Contents
- 1. Y-S3 General Operation
- 2. Constructing the Room Shape & Audience Area
- 3. Editing Project Properties
- 4. Placing Speakers
- 5. Adjusting Speaker Parameters
- 5-1. Speaker Arrays
- 5-2. Distributed Speakers
- 6. Displaying Calculation Results
- 7. Simulation Results Report
- 8. Exporting Configurations in DME Designer Format
- 9. Other Functions
- 10. General Theory
Yamaha Sound System Simulator Y-S
3
Owner’s Manual V3.1
55
Place a check in the checkboxes of those fields you want to export. Use the Frequency Selection window to change
the frequencies and bandwidths of the contour and sound pressure distributions if desired. You can click
to save these as the default settings for exporting project reports. Click and enter a file name
to initiate generation and saving of the project file report. If you perform an operation while a project report is being
generated, images may not be exported correctly. Do not perform other operations while a project report is being
generated. Push the Esc key to cancel creation of the report.
Note that the following characters and “space” cannot be used for file names.
; / ? : @ & = + $ , < > # % " } | ¥ ^ [ ] ` *
The background color of Aspect View and Graph image data that is generated in project reports is always set to
[White].
If no receiving points have been saved, the Frequency Responses item is not exported
• Saving text data
You may save speaker conditions and calculation results as text data in CSV format. CSV format can be imported into
spreadsheet applications such as Microsoft Excel®.
SPA Property
You may save all the information for the speaker arrays as text data (in CSV format). Select [SPA Property (S)…(*csv)]
from [Export (E)] in the [File (F)] menu to save SPA property.
SPL Data
You may save currently displayed sound pressure distribution results in Aspect View as text data (in CSV format).
Select [SPL Data (S)…(*csv)] from [Export (E)] in the [File (F)] menu to save the data.
Graph Data
You may save current and stored frequency characteristic results in Graph as text data (in CSV format). Select [Graph
Data (G)…(*csv)] from [Export (E)] in the [File (F)] menu to save the data.
• Saving images
You may save results of calculations displayed in Aspect View and Graph as image data (in JPEG format). The
background color of image data is always set to [White].
Image of Aspect View
You may save the currently displayed sound pressure distribution or contour figure in Aspect View as image data in
JPEG format. Select [Image of Aspect View (A)…(*jpg)] from [Export (E)] in the [File (F)] menu to save the data.
Image of Graph View
You may save the currently displayed frequency characteristic in Graph as image data in JPEG format. Select [ Image
of Graph View (H)…(*jpg)] from [Export (E)] in the [File (F)] menu to save the data.