User Guide

Quick Guide Playing the MO
Using the Controllers on the MO
52
Owner’s Manual
Control slider
Changing the volume
You can adjust the volume of the Voice/Performance you play on the keyboard, or the volume of the specified part (track) of
the Song/Pattern by using the Control sliders. In the Master mode, various functions as well as the volume can be assigned
to the Control sliders when the Zone Switch is set to on (page 215).
Function sets assigned to the Control slider
* An Element is the fundamental tone generating unit of a Voice. For details, see page 53.
n The [MASTER VOLUME] slider adjusts the overall output level of the instrument, while the Control sliders adjust the MIDI Volume setting of the
corresponding Element or Part.
n Precautions—Using sliders in the Performance mode
In the Performance mode, the Control sliders are assigned according to the specific Parts that
are assigned in each Performance. Keep in mind that the slider number may not correspond to
the same numbered Part.
For example, when using a Performance (as shown at right) in which two Parts (Part 1 and Part
4) are combined, the sliders are assigned as follows:
• Slider 1 controls the volume of Part 1.
• Slider 2 controls the volume of Part 4.
• Sliders 3 and 4 are not used.
Mode
Functions controlled by each slider
Control slider 1 Control slider 2 Control slider 3 Control slider 4
Voice mode When a Normal Voice is
selected
Element 1 Volume Element 2 Volume Element 3 Volume Element 4 Volume
When a Drum Voice is
selected
Volume of the entire Voice sound (moving any slider produces same volume)
Performance mode Controls Volume of the assigned Parts (see “Precautions” note below).
Song mode/
Pattern mode
When tracks (Parts) 1 – 4 are
selected
Track 1 (Part 1) Volume Track 2 (Part 2) Volume Track 3 (Part 3) Volume Track 4 (Part 4) Volume
When tracks (Parts) 5 – 8 are
selected
Track 5 (Part 5) Volume Track 6 (Part 6) Volume Track 7 (Part 7) Volume Track 8 (Part 8) Volume
When tracks (Parts) 9 – 12
are selected
Track 9 (Part 9) Volume Track 10 (Part 10)
Volume
Track 11 (Part 11)
Volume
Track 12 (Part 12)
Volume
When tracks (Parts) 13 – 16
are selected
Track 13 (Part 13)
Volume
Track 14 (Part 14)
Volume
Track 15 (Part 15)
Volume
Track 16 (Part 16)
Volume
Master mode When the Zone Switch is set
to on (page 215)
Function assigned for each Master from the [MASTER] → [EDIT] → Zone selection → [F5] KN/CS display
(page 217)
Edit Indicator
Moving the sliders directly changes the parameters of the Voice, Performance, Song, or Pattern. When any of the
parameters are changed, the [E] (Edit) Indicator appears in the top left of the display. This indicates that the current
Voice, Performance, Song, or Pattern has been modified but not yet stored. For details about the Edit indicator, see
page 36.
MASTER
VOLUME
ZONE 1 ZONE 2 ZONE 3 ZONE 4