User Guide

Setting up
and Playing
Power supply
20
Owner’s Manual
Setting up and Playing
Power supply
Power supply connections
Before you connect the power adapter, make sure that the MO [STANDBY/ON] switch is set to STANDBY
(Off).
1 Connect the plug of the power adapter PA-5D to the DC IN terminal on the rear panel of the MO.
2 Plug in the AC cable to an appropriate AC outlet.
n Follow this procedure in reverse order to disconnect the power adapter.
• Be sure to use the included adapter. Using an AC adapter other than the PA-5D may cause damage to the MO, and may even
pose a serious electrical shock hazard.
• Connect the adapter to an AC outlet of the specified voltage.
Even when the [STANDBY/ON] switch is in the STANDBY position, a small amount of electricity is still flowing to the unit. When
you do not plan to use the MO for an extended period of time, be sure to unplug the AC power adapter from the AC outlet.
Connecting the speakers or pair of headphones
Since the MO has no built-in speakers, you will need to monitor the sound of the instrument by using
external equipment. Connect a set of headphones, powered speakers, or other playback equipment as
required.
DC IN
STANDBY
ON
Rear panel
1
AC cable
Power adapter
PA-5D
2 To electrical outlet
WARNING
CAUTION
MO
Powered speaker (Left)
Powered speaker (Right)
Headphones
OUTPUT L/MONO
OUTPUT R
PHONES