User Manual

6. Appendix
MMP1 Operation Manual 65
6. Appendix
6-1. Error messages
When syncing with the MMP1
When operating the MMP1 Editor
When performing firmware updates
Message Description
Incorrect passcode
The passcode you entered is incorrect.
Transfer error
Failed to transfer data.
Data error
Data errors were found.
Timed out
Timed out after failing to sync with the MMP1 within a set period of time.
Disconnected
Disconnected from the MMP1.
Version mismatch. MMP1 Editor or MMP1
may need to be updated.
The MMP1 Editor version is not compatible with the MMP1.
Update the MMP1 Editor or the MMP1 firmware.
The selected MMP1 has already reached the
maximum number of connected devices.
The maximum number of devices that can be connected with the MMP1 Editor has
been reached.
Error
Another error occurred.
Message Description
Incorrect password
The password you entered is incorrect.
Maximum number of channels exceeded.
You have exceeded the maximum number of channels that can be set.
File cannot be opened
The file could not be opened.
File cannot be read
The file could not be read.
Invalid File
Invalid file detected.
Failed to save file
Failed to save file.
This process could not be executed
because the devices are in sync.
Cannot execute process while syncing with the MMP1.
Message Description
Update failed. Transfer error.
Update failed. Failed to transfer data.
Update failed. Data error.
Update failed. Data errors were found.
Update failed. Timed out.
Update failed. Update timed out.
Update failed. Disconnected.
Update failed. Lost connection with the MMP1.
Update failed.
Update failed.
Invalid File
Invalid file detected.