User Manual

3. Devices and software to be used

Here are the devices and software to be used in this example:

1. ortho remote

2. Mac with OSX 10.13.3 (10.10 or later is fine which is BLE-MIDI compatible) installed

3. SysEx Librarian v1.3.1 (MIDI device communication software)

4. Apple iPad with MMP1 Controller v1.1.0 installed (iOS10 or later)

4. Setup Procedures

Below is the procedures for setting up ortho remote for controlling MMP1:

1. Update MMP1 Controller

2. Download and install SysEx Librarian

3. Download the configuration file

4. Configure ortho remote

5. Pair iPad and ortho remote

4-1. Update MMP1 Controller

In order to use ortho remote with MMP1, MMP1 Controller needs to be updated to v1.1.1 or later.

If older version of MMP1 Controller is used, please download and install the latest version from

Apple App Store.

4-2. Download and install SysEx Librarian

This example utilizes a software called SysEx Librarian to send the configuration file for

controlling MMP1 Controller, from Mac to ortho remote. SysEx Librarian can be obtained from the

following website: