Operation Manual

CONNECTION
5 En
PREPARATION
English
Playback operation with your iPod connected to the
transmitter turns the unit on automatically, and you can
enjoy the music in your iPod.
y
To turn on the unit by the playback operation of your iPod, set
POWER SAVING to NORMAL (☞ P. 11).
The volume of the unit is adjusted simultaneously with the iPod.
Be careful when controlling the volume with your iPod.
■ Group setting
To operate your iPod using transmitter, you need to match
the wireless group between the transmitter and the CD
receiver (CRX-140). The default setting for both the
transmitter and the CD receiver is A2.
To select wireless group of the CD receiver
(CRX-140)
■ Wireless connection to Subwoofer
You can use a subwoofer wirelessly with the wireless
subwoofer kit (SWK-W10, etc., sold separately). To
establish the wireless connection, set WIRELESS SW to
YES (☞ P. 11). For details, refer to the owner’s manual
of SWK-W10.
■ Stationing iPod
Station or remove your iPod whenever you want.
y
Your iPod is automatically charged when your iPod is set in the
iPod dock/charging cradle, even if the unit is in standby mode.
The unit is compatible with iPod (5th generation), iPod classic,
iPod nano, and iPod touch.
To secure the connection, attach a compatible Dock Adapter
supplied with the iPod or an iPod Universal Dock Adapter
(sold separately), and remove the protective case covering
your iPod.
Station your iPod in the charging cradle when you want to charge
your iPod. You can also control your iPod with the remote control
when your iPod is in the charging cradle.
■ Connecting USB
Connect or remove your USB device whenever you want.
y
USB device is automatically charged when it is connected to the
unit, even if the unit is in standby mode.
• This unit supports USB mass storage class devices (e.g., flash
memories or portable audio players) using FAT16 or FAT32
format.
• Do not connect devices other than USB mass storage class
devices (such as USB chargers or USB hubs), PCs, card
readers, an external HDD, etc.
Wireless connection
Note
MCR-140
GROUP A1
GROUP A2
GROUP B3
Press SETUP.
Select WIRELESS SET
menu.
Confirm with ENTER.
Select the group.
Complete the setting.
1 2
3 4
5 6
Exit setup menu.
Other connection
Note
Note
Notes
Dock Adapter
MCR-040
iPod dock
MCR-140
Transmitter
Charging
cradle