Owner's Manual

Using an external head amp
179
M7CL Owner’s Manual
Graphic EQ and effects
16
6
To remotely control an external HA, press
the rack in which the external HA you want
to control is mounted.
The EXTERNAL HA popup window will appear.
Here you can remotely control the external HA by
using the knobs and buttons in the M7CL’s display or
the encoders of the top panel.
1 +48V MASTER
If an external HA is connected to the REMOTE con-
nector, the on/off status of the master phantom power
is shown here. (Switching this on/off is performed on
the external HA itself.)
B +48V buttons
These switch phantom power on/off for each channel.
C GAIN knobs
These indicate the gain of the external HA. To adjust
the value, press the knob to select it, and use multi-
function encoders 1–8. The level meter located at the
immediate right of the knob indicates the input level
for the corresponding port.
D HPF knobs / ON buttons
These controls switch the external HA’s built-in high-
pass filter on/off, and adjust its cutoff frequency. If you
press the HPF knob to select it, you’ll be able to adjust
it using the corresponding multifunction encoder.
E Rack select tabs
These tabs switch the rack that is displayed in the
EXTERNAL HA popup window.
7
To remotely control the external HA from an
input channel of the M7CL, use the naviga-
tion keys to access the OVERVIEW screen
that includes the channel whose HA you
want to control.
8
Press the HA/PHASE field of the channel
whose external HA you want to adjust; the
HA/PATCH popup window will appear.
9
Press the input port popup button, and
select the input port assigned to the exter-
nal HA.
With these settings, the external HA can be used in the
same way as the M7CL’s own HA. For details on the
HA/PATCH popup window, refer to “Making HA
(Head Amp) settings” (→ p. 55).
2
3
4
5
1
• If you newly connect an AD8HR, these settings will be the
state of the AD8HR.
• These knobs and buttons are shown in the EXTERNAL HA
popup window even if an AD8HR is not connected, allowing
you to create and store a scene even while the AD8HR is not
connected.
HINT
HA/PHASE field
Input port popup button
• External HA settings are saved as part of the scene. How-
ever, the phantom master setting is an exception to this.
• When you adjust the brightness of the M7CL’s panel LEDs,
this will also affect the LEDs of the external HA.
HINT