Owner's Manual

Using the Fade function
139
M7CL Owner’s Manual
Scene memory
12
“Fade” is a function that smoothly changes the faders of specified channels and DCA groups to
their new values over a specified duration when you recall a scene. The settings of the Fade
function are made independently for each scene.
1
Press the SCENE field in the function
access area.
The SCENE LIST window will appear, where you can
perform various operations for scene memory.
1 SCENE field
B
FADE TIME tab
2
Press the “FADE TIME” tab at the bottom of
the SCENE LIST window.
You can use tabs to switch the right half of the SCENE
LIST window between three different fields. In this
case, press the tab to make the FADE TIME field
appear.
1 FADE TIME field
In this field you can make settings for the Fade func-
tion. The buttons in this field correspond to the scene
list shown in the left side of the SCENE LIST window.
The CURRENT SETTING field lets you make Fade
settings that will be used the next time you perform a
Scene Store operation.
B SET buttons
These buttons display the FADE TIME popup win-
dow.
C FADING buttons
These buttons switch the Fade function on/off for each
scene.
D Fade time
These indicate the fade time (the time over which the
fader will reach the new value).
3
Press the SET button to access the FADE
TIME popup window.
In this popup window you can select the channel to
which Fade will be applied, and adjust the fade time.
1 Channel display field
The channels or DCA groups to which Fade is applied
are highlighted.
B FADE TIME knob
This knob sets the fade time. You can use the corre-
sponding multifunction encoder to adjust this.
C SET ALL button
If you press this button, the Fade effect will be applied
to all faders of that scene.
D CLEAR ALL button
If you press this button, the Fade effect will be can-
celled for all faders of that scene.
4
Press the [SEL] keys of the desired chan-
nels or DCA groups to select the channels
and DCA groups to which the Fade effect
will be applied (multiple selections are
allowed).
The [SEL] keys of the selected channels and DCA
groups will light, and those channels and DCA groups
will be highlighted in the channel display field of the
popup window. You can cancel a selection by pressing
a lit [SEL] key once again to make it go dark.
Using the Fade function
2
1
1
4
3
2
• When you recall a scene, the Fade settings of that scene will
be reflected in CURRENT SETTING.
HINT
1 3 4
2