Owner's Manual

M7CL Owner’s Manual
Directly outputting an INPUT channel
102
The signal of an INPUT channel can be directly output from a desired OMNI OUT jack or from an
output channel of the desired slot. For example, signals can be sent via a digital I/O card
installed in a slot to an external digital recorder, so that a live recording can be made without
being affected by mixing operations within the M7CL.
1
As desired, connect your external equip-
ment to an OMNI OUT jack or to an I/O card
in slots 1–3.
2
Use the navigation keys to access the
OVERVIEW screen for the input channel
that you want to directly output.
3
Press the INSERT/DIRECT OUT field to
access the INSERT/DIRECT OUT popup
window.
There are two variations of this popup window; one-
channel and eight channel. These windows include the
following items.
[INSERT/DIRECT OUT popup window (1ch)]
1 Icon / Channel number / Channel name
This indicates the icon selected for that channel, the
channel number, and the channel name.
B DIRECT OUT field
Here you can make settings for direct output. Press a
field to select PRE HPF (before the HPF), PRE EQ
(before the attenuator), or PRE FADER (before the
fader) as the position for direct output.
C DIRECT OUT popup button
This indicates the output port used for direct output.
Press this button to open a popup window where you
can select the output port.
D DIRECT OUT ON/OFF button
Turns the direct output on/off.
E DIRECT OUT LEVEL knob
Adjusts the level of the signal that is directly output.
[INSERT/DIRECT OUT popup window (8ch)]
1 Channel number / Icon
This shows the channel number and the icon that is
selected for that channel. You can press this field to
change the selected channel.
B Channel name
This indicates the name assigned to that channel.
C DIRECT OUT ON/OFF button
This button switches the direct output on/off. If this
button is off, the direct output for that channel will be
disabled.
The currently selected direct output position is shown
above the button.
D DIRECT OUT popup button
This indicates the output port used for direct output.
Press this button to open a popup window where you
can select the output port.
E DIRECT OUT LEVEL knob
Adjusts the level of the signal that is directly output.
Directly outputting an INPUT channel
M7CL
DIGITAL IN
DIGITAL OUT
digital
I/O card
digital recorder
• If you install a digital I/O card in a slot and digitally connect an
external device, you’ll need to synchronize the word clock
between the M7CL and your external device (
→ p. 208).
HINT
1
3 4 52
1
3
5
2
4