Service manual

6D03F1X
42
11. Connect the shift cable
F
and throttle
cable
G
, and then adjust their lengths.
12. Install the Woodruff key and flywheel
magnet.
13. Tighten the flywheel magnet nut to the
specified torque.
CAUTION:
Apply force in the direction of the arrows
shown to prevent the flywheel holder from
slipping off easily.
NOTE:
Apply engine oil to the flywheel magnet nut
before installation.
14. Install the pointer
H
.
NOTE:
Align the marks
a
on the pointer
H
, which
you made during disassembly.
15. Install all removed parts.
Flywheel holder: 90890-06522
T
R
.
.
Flywheel magnet nut:
190 N·m (19.0 kgf·m, 140 ft·lb)
Crankcase