User Manual
Table Of Contents
- About This Guide
- Step 1: Device Setup and Connections
- Step 2: EtherSound Network Setup
- Step 3: LS9 Console Setup
- Appendices
- Appendix A: Which patching system to use when?
- Appendix B: Signal flow between SB168-ES and LS9
- Appendix C: Manual patch of LS9
- Appendix D: Manual patch of EtherSound
- Appendix E: Manual setting of Remote HA
- Appendix F: Assigning stagebox patch to existing SCENEs
- Appendix G: Using the Ring setting in Quick Setup
- Appendix H: Using SB168-ES inputs on LS9 second layer
11
Appendix
Output patching
Output patching can also be changed as desired.
This example explains how to patch MIX and STEREO channels to Slot out ports manually.
For MIX channels:
Move the cursor to the Port select popup button, and
press the [ENTER] key.
Select SLOT1 and then select Port 1 of SLOT1.
Assign other MIX channels in the same way.
For STEREO channels:
Move the cursor to the Port select popup button, and press
the [ENTER] key.
Select SLOT 1 and then select Port 7 of SLOT1.
Assign STEREO R to port 8 of SLOT1 in the same way.
Output patching by loading SB_LS932.L9A session file
MIX 1-6, STEREO L/R – Output port 1-8 of SLOT1
MIX 7-12, STEREO L/R – Output port 9-16 of SLOT1