Owner's Manual

LS9 Editor Owner’s Manual
58
ARack No. (Rack selection)
Here you can select the rack that you want to operate. Only
5–8 can be used with effect modules; 1–4 are only for GEQ
modules.
B BYPASS
This button temporarily bypasses the effect. Inactive when
using a GEQ module.
C CUE
This button cue-monitors the output of the currently selected
effect. Inactive when using a GEQ module.
D EFFECT NAME
Indicates the title of the currently selected effect.
E EFFECT TYPE
Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click
the text box, and select the desired effect type from the popup menu that appears.
F LIBRARY
This button accesses the effect library. Clicking this button will open the EFFECT page of the LIBRARY window.
GInput patch
Click the L CHANNEL or R CHANNEL area, and choose one of the
following as the signal route that will be patched to the L/R input chan-
nels of the internal effect.
(*)
Selectable only for effect modules.
The channel name is shown in the boxes immediately below.
H Input meter
Indicates the level of the signal being input to the internal effect.
I Output patch
Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be
patched to the L/R output channels of the internal effect.
(*1)
INPUT CH 33–64 can be displayed only if you’re editing offline and have selected LS9-32 in the Model Select field of the Mixer Setup
window, or if you are editing online with the LS9-32 connected.
(*2)
Selectable only for effect modules.
The channel name is shown in the boxes immediately below.
NONE No assignment
MIX 1–16
(*)
MIX channel 1–16
MATRIX1–8
(*)
MATRIX channel 1–8
ST L, ST R, MONO(C)
(*)
STEREO channel L/R, MONO channel
INS CH 1–32 INPUT CH 1–32 insert in
INS MIX 1–16 MIX channel 1–16 insert in
INS MATRIX1–8 MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS
MONO(C)
Insert-in of STEREO channel L/R or the MONO
channel
NONE No assignment
CH 1–64
(*1)(*2)
INPUT CH 1–64
(*1)
STIN1L–STIN4R
(*2)
ST IN CH 1–4 (L/R)
INS CH 1–32 INPUT CH 1–32 insert out
INS MIX 1–16 MIX channel 1–16 insert out
MATRIX INSERT1–8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel
4
21 3
6
5
8
J
K
7
9