Specifications

ELEC
R-193
LIGHTING SYSTEM
5. WIRING CONNECTIONS
• Check entire lighting system for poor Con-
nections refer to “WIRING DIAGRAM”
Page
Check the Lighting Coil resistance
OUT OF SPECIFICATION
MEETS
SPECIFICATION
• Repair or Replace wireharness
POOR CONNECTIONS
CONTINUITY
• Check the condition of individual Lighting
System Circuits
4. LIGHTING VOLTAGE
• Connect the Tachometer to Spark Plug
lead.
• Disconnect the Taillight coupler from wire
harness
• Connect the Multimeter (AC 20 V) to tail-
light wire
• Start the Engine and accelerate the engine
up to 3000 RPM and then to 8000 RPM
• Measure the lighting Voltage with (full load
by switching on the Headlight)
Multimeter (+) lead Ÿ Blue terminal ¿
Multimeter (-) lead Ÿ Black terminal À
7-12
æ
Lighting Voltage (min) :
12 V @3000 RPM
(With Full Load) (max) :
15V @ 8000 RPM
æ