User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Graphic EQ, effects, and Premium Rack
Reference Manual
128
This window includes several pages, which you can switch between using the tabs located at the
bottom of the window.
3. Press the USER DEFINED KEYS tab to select the USER DEFINED KEYS page.
The USER DEFINED KEYS page enables you to assign functions to USER DEFINED keys [1]–
[16].
4. Press the popup button for the USER DEFINED key to which you want to assign the
Tap Tempo function.
The USER DEFINED KEY SETUP popup window will appear.
5. Select “TAP TEMPO” in the FUNCTION column, select “CURRENT PAGE” in the
PARAMETER 1 column, and press the OK button.
Use the / buttons or multifunction knobs to select an item in each column. Press the OK
button. The Tap Tempo function will be assigned to the USER DEFINED key that you selected in
step 4.
NOTE
• If you specify “CURRENT PAGE” in the PARAMETER 1 column, the Tap Tempo function can be
used for the currently-displayed effect (rack).
• If you specify “RACK x” (x=1–8) in the PARAMETER 1 column, you will be able to use the Tap
Tempo function only for a specific effect (rack).
• For more information on USER DEFINED keys, see “USER DEFINED keys” on page 169.
6. In the Function Access Area, press the RACK button to access the VIRTUAL RACK
window, and then use the EFFECT tab to display the EFFECT field.
7. Press the rack in which the effect you want to control is mounted.
The EFFECT popup window will appear.