User Manual

ManualsBrandsYamaha ManualsMY cards and interfacesRack E/S

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

SELECTED CHANNEL section

Reference Manual

■ INSERT field

This field enables you to make insert settings.

1 Popup button

Press this button to open the INSERT/DIRECT OUT 1ch

popup window.

2 ON button

Switches the insert on or off.

3 RACK EDIT popup button

Appears if an effect or Premium Rack is inserted. Press this button to display the edit screen for

the inserted rack.

4 IN indicator

Appears if a port has been assigned to the insert-in patch. It lights when the signal is sent to the

insert-in.

■ DIRECT OUT field

This field enables you to make insert settings.

1 Popup button

Press this button to open the INSERT/DIRECT OUT 1ch

popup window. The Direct Out level value will appear below

the button.

2 ON button

Switches the Direct Out on or off.

■ RECALL SAFE field

This field enables you to make Recall Safe settings.

1 Popup button

Press this button to open the RECALL SAFE popup window.

2 ON button

Switches the Recall Safe status on or off.

3 PARTIAL indicator

This will light if recall safe applies only to some of the parameters, not to all channel settings.

■ FADER field

This field enables you to view and make settings for the channel on/

off status and the level.

1 Fader

Displays the current level.

Use the faders on the top panel to set the levels.

2 Level indicator

Displays the current level setting by numerical value. If the

signal is clipping at any point in the channel, the ΣCLIP indicator will light.

3 ON button

Switches the channel status on or off. The button is linked with the corresponding [ON] key on

the top panel.

■ DCA/MUTE field

This field enables you to view and select the DCA or mute group to which

the channel is assigned.

1 Tabs

Select DCA or mute as a group to set. Press the selected tab once again

to open the DCA/MUTE GROUP ASSIGN MODE popup window.

When the DCA group tab is selected:

2 DCA group select buttons

Select the DCA group to which the channel is assigned.

3 Mute group indicators

Indicate the mute group to which the channel is assigned.

When the mute group tab is selected:

4 Mute group select buttons

Select the mute group to which the channel is assigned.

NOTE

If the dimmer level is set to the mute group, this button lights

orange.

5 MUTE SAFE button

Temporarily removes the channel from the mute group.

6 DCA group indicators

Indicate the DCA group to which the channel is assigned.

4 3