User Manual

iPhone/iPad Connection Manual
10
Automatic Setup by WPS
If your access point supports WPS, you can easily connect the instrument to access point by WPS,
without making settings, such as key input, etc.
NOTE Check whether your access point supports WPS by referring to the owner’s manual for the access point you
are using.
When using the UD-WL01 USB Wireless LAN Adaptor:
1 As illustrated, press and hold the [WPS] button for longer than three seconds.
The LED lamp of the adaptor flashes.
NOTE May not be able to start WPS by above instruction depending on the instrument. For details, refer to the
“When not using the UD-WL01 USB Wireless LAN Adaptor.”
When not using the UD-WL01 USB Wireless LAN Adaptor:
1 As illustrated, press the [Start WPS] button via the display of the instrument.
NOTE The button name and displayed name differ depending on the instrument. For details, refer to the
Owner’s Manual or the Reference Manual of your instrument.