User Manual

ManualsBrandsYamaha ManualsMixersDigital Mixing Console

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
Channel Strip section
- Operations in the Channel Strip section
Input and output patching
- Changing the input patch settings
- Changing the output patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
EQ and Dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Channel Job
- DCA group
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
Graphic EQ, Parametric EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
- Remotely controlling an external head amp
- Controlling an internal head amp
MIDI
- MIDI functionality on the QL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using Parameter Changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the QL console with Nuendo Live
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
Warning/Error Messages
Index
Data List
- Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart

EQ and Dynamics

Reference Manual

2 Dynamics parameter area

This area displays the dynamics type and various meters. Press the area to access the

DYNAMICS 1ch window of that channel.

If DUCKING, EXPANDER, COMPANDER (-H/-S), or DE-ESSER has been selected as the

dynamics type, the type appears near the top of this area.

The lower part of this area displays meters that indicate the levels of signals after

dynamics processing, the GR meter, and the threshold (a numeric value). If the

dynamics processor is any type other than GATE, the threshold setting is indicated as a

vertical line.

Using the EQ or Dynamics libraries

You can use dedicated libraries to store and recall EQ and dynamics settings. For details on

using the EQ and dynamics libraries, refer to the “Using the libraries” section in the separate

Owner’s Manual.

EQ library

There is an “INPUT EQ LIBRARY” that lets you store/recall EQ

settings for input channels, and an “OUTPUT EQ LIBRARY” that

lets you store and recall EQ settings for output channels.

To recall settings from a library, press the LIBRARY tool button in

the/HPF/EQ window.

NOTE

You can recall 199 different settings from both the input EQ library and output EQ library. Forty

(40) of the input library items are read-only presets, and three (3) of the output library items are

read-only presets.

Dynamics library

Use the “Dynamics Library” to store and recall dynamics settings. All of the dynamics

processors on QL series units use this dynamics library. (However, the available types will

differ between an input channel’s Dynamics 1 and Dynamics 2, and an output channel’s

Dynamics 1. You cannot recall a type that cannot be selected.)

To recall an item from the dynamics library, press the LIBRARY tool button in the DYNAMICS

1/2 window.

NOTE

You can recall 199 different settings from the library. Forty-one (41) of these are read-only

presets.

LIBRARY button