Audio / Midi Interface Owner's Manual

English
26
*1: Signal input from ADAT-compatible device: Normal Rate Fs 44.1KHz(–6%) to 48KHz(+6%)
Double Rate Fs 88.2KHz(–6%) to 96KHz(+6%)
*2: Always balanced, regardless of whether a XLR-3-31 or TRS phone is used. (1=GND, 2=HOT, 3=COLD/Tip=HOT, Ring=COLD,
Sleeve=GND)
*3: Balanced Phone (Tip=HOT, Ring=COLD, Sleeve=GND)
*4: INSERT IN & OUT feature unbalanced phone jacks. (Tip = OUTPUT, Ring=INPUT, Sleeve=GND)
*5: ALESIS proprietary multi-channel optical digital interface format
In these specifications, when dBu represents a specific voltage, 0 dBu is referenced to 0.775 Vrms.
■ Control
*6: Phantom power (+48 V) is not supplied when the TRS phone is used. If the [HI-Z/LINE/MIC] switch is set to HI-Z, phantom
power is not supplied to INPUT jack 1.
■ Others
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha
Corp. reserves the right to change or modify products or specifications at any time without prior
notice. Since specifications, equipmentr or options may not be the same in every locale, please
check with your Yamaha dealer.
Digital Input/
Output
Connector Format
Recommended
output level
Other details
ADAT/DIGITAL
OPTICAL IN, OUT
OPTICAL
ADAT
*5
—
Supports DOUBLE
(up to 96 kHz).
IEC-60958 Consumer use
(DIGITAL)
—
DIGITAL STEREO
IN, OUT
RCA PIN IEC-60958 Consumer use 0.5Vpp/75Ω
The IN jack features an internal
sampling rate converter.
MIDI IN, OUT A/B DIN 5pin MIDI —
mLAN 1/2 IEEE1394 6pin mLAN — Compatible with S400 and S200
Input Gain Gain Knob 1, 2, 3, 4, 5/6, 7/8
Phantom Switch
Phantom (+48V) On/Off for Input1,2 channel with LED
*6
Gain Select Switch (PAD Switch) Input Ch 1 : Mic/Line/Hi-Z, Input Ch 2 : Mic/Line
Peak LED Input 1, 2 channel
Monitor Select Switch (Fs Indicator)
Direct Monitoring Channel Selector : 1/2, 3/4, 5/6, 7/8, Digital In / Fs Indicator
(holding down a while)
Monitor LED (Fs Indicator)
Direct Monitoring Channel Selector : 1/2, 3/4, 5/6, 7/8, Digital In / Fs Indicator :
44.1, 48, 88.2, 96kHz
Monitor Volume Direct Monitoring Volume for selected channel by monitor switch
Master Volume Output Level of Master Output L/R and Phones
Optical Select Switch Digital / ADAT Normal / ADAT Double
Master Clock LED mLAN / ADAT / Internal (fixed at 44.1kHz)
mLAN Active LED For Information of mLAN’s situation
Power Switch Stand by/On switch
Supplied Accessories
Power Adaptor (PA-5D), Owner’s Manual set, CD-ROM x 2, mLAN (IEEE1394)
cable
Power Consumption 16W
Dimensions 480(W) x 372.7(D) x 44(H)
Weight 3.9kg