User Guide
Table Of Contents
- OWNER'S MANUAL
- INTRODUCTION
- PREPARATION
- SETUP
- BASIC OPERATION
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- QUICK REFERENCE GUIDE
Using SET MENU
29 En
SETUP
English
The following diagram illustrates the overall flow of the setup procedure.
The flow chart of SET MENU
Run AUTO SETUP (IntelliBeam).
See “AUTO SETUP (IntelliBeam)” on page 31.
Look for a remedy.
See “Error messages for AUTO SETUP” on page 37 for a complete list of error
messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode.
See “Playback” on page 41, “Enjoying surround sound” on page 44.
Run MANUAL SETUP.
See “MANUAL SETUP” on page 56.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 58) or for BEAM ADJUSTMENT (see page 59) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 61).
If an error occurs
If you want to make additional settings
and adjustments
Run LANGUAGE SETUP.
See “Changing OSD language” on page 30.