Operation Manual

Controls and functions
15 En
INTRODUCTION
English
F DVD player/VCR control buttons
Control your DVD player or VCR (see pages 105 and
106).
G My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 63).
H TV POWER
Turns on the power of your TV or sets it to the standby
mode (see page 104).
I AV POWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 105 and 106).
J INPUT1
Switches the input source on your TV (see page 104).
K MACRO
Use to set the TV macro (see page 107).
L /5
Switches the preset station number (1 to 8) when this unit
is receiving an FM broadcast or XM channel (see
page 54).
M CAT
Switches the preset station group (A to E) when this unit is
receiving an FM broadcast or XM channel (see page 54).
N SLEEP
Sets the sleep timer (see page 72).
O INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 93).
P Beam mode buttons
Change the beam mode settings (see pages 56, 62, and
63).
Q SUR. DECODE
Selects the surround mode for playback (see page 59).
R MENU
Displays the setup menu on your TV monitor (see
pages 39 and 77).
S Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
T RETURN
Selects sleep timer settings or returns to the previous SET
MENU screen.
U TV VOL +/–
Adjusts the volume level of your TV (see page 104).
V CH +/–
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages 104 and 106).
W TV MUTE, CODE SET
Mutes the audio output of your TV (see page 104).
Sets up remote control codes (see page 103).
The functions L and M are available only when the FM/XM
stations are preset.
Note