Manual

• Audio signal flow
HDMI
DIGITAL AUDIO
(COAXIAL)
DIGITAL AUDIO
(OPTICAL)
Input
0
Output
AUDIO
--._- Digital output
...... _> Analog output
• 2-channel as well as mMlti-channel PCM, Dolby Digital and
DTS signals input at the HDMl lN 1 or HDMI IN 2jack can be
output at the HDMI OUT jack only when "SUPPORT AUDIO"
is set to "OTHER" (see page 77).
• Audio signals input at the HDMI IN jacks are not output at the
AUDIO output and DIGITAL OUTPUT jacks.
• Video signal flow
Input
HDMI
Output
COMPONENT
VIDEO
$VIDEO
VIDEO i_ @
-_ Through
--4> Video conversion ON (see page 82)
• When the analog video signals are input at the COMPONENT
VIDEO, S VIDEO and VIDE()jacks, the priority order of the
input signals is as follows:
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
• Digital video signals input at the HDMI IN 1 or HDMI IN 2
jack cannot be output from analog video output jacks.
• The analog component video signals with
480i (NTSC)/576i (PAL) of resolution are converted to the
S-video or composite video signals and output at the S VIDEO
MONITOR OUT and VIDEO MONITOR OUT jacks.
• This unit does not accept analog component video signals with
1080p of resolution.
• The OSD signal is not outpMt at the VCR OUT add DVR OUT
jacks and is not recorded.
• Use the "HDMI UP-SCALING" parameter in "DlSPLAY SET"
to deinterlace and convert the resolution of the video signals
output at the HDMl OUT jack (see page 81).
17En