AV Receiver Owner's Manual

SET MENU
74
You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ BASIC SETUP BASIC SETUP
Use this feature to set up your system quickly and with minimal effort (see page 27).
■ MANUAL SETUP MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Sound menu 1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Input menu 2 INPUT MENU
Use this menu to manually reassign the input jacks, select the input mode or rename the input source.
SET MENU
Parameter Features Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, and the
crossover frequency.
78
B)SP LEVEL
Adjusts the output level of each speaker.
79
C)SP DISTANCE
Adjusts the delay time of each speaker.
80
D)CENTER GEQ
Adjusts the tonal quality of the center speaker.
80
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
80
F)D. RANGE
Adjusts the dynamic range of Dolby Digital or DTS signals.
81
G)AUDIO SET
Adjusts the muting level, audio delay and tone bypass settings.
81
Parameter Features Page
A)INPUT ASSIGN
Assigns the input jacks of this unit according to the component to be used.
81
B)INPUT MODE
Selects the initial input mode of the source.
82
C)INPUT RENAME
Changes the name of the input source.
82
D)VOLUME TRIM
Adjusts the output volume of each jack.
82