Manual

l"l=ii[_l=li'ff
• Zone set ':::"::"-'"'::,::'_::-T'
F ',."JF=[IF _=FT
i ,=,=LI'IC,;]Ci
SF' B...... I'IF;ii4
i,_ := Exit
Speakers B SF' i!!!;
Use to specify the location of" speakers connected the
SPEAKERS B terminals.
Choices: MAIN, ZONE B
• Select "MAIN" to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select "ZONE B" if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are nmted and the unit outputs sound
from SPEAKERS B only.
• If you select "ZONE B" and comlect headphones to the
PHONES jack on the trait, the sound is outpm from both
headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
• Zone 2 set i:::..,..::,,-,u_:::....:,,:::._::...r
r.',,TNi,l;,i, '_;T
CIUTF'U7 UCIL= • Hg, Rh,
_ _- -E -iE¸
A_/V I Ul='ljl=?lldFi
:;,z']_i',:t
Zone 2 amplifier ZCi".i[!Z!: l::iMl:::'
Use to select how the ZONE 2 speakers will be amplified.
Choices: ON, OFF
• Select "OFF" if you do not use Zone 2 speakers or if
you connect your Zone 2 speakers through an external
amplifier connected to this unit's ZONE 2 OUTPUT
jacks.
• Select "ON" to use this unit's internal amplifier if you
connect your Zone 2 speakers directly to this unit's
PRESENCE/ZONE 2 speaker terminals.
• Zone 3 set ,'::=V::=,",_..H::X:r,:::'i::xr'
OUTF'LIT IJOL= ,iJIIR,,
<:i_:::¸ _ S,D!c,ct
Output volume ,...,_i"Fi2,iH" i i,",i
Use to select how the volume control will operate with
regard to the ZONE 3 OUTPUT jacks.
Choices: VAN., FIX
• Select"VAR." to adjust the ZONE 3 OUTPUT volume
simultaneously with VOL /+ on the remote control.
• Select "FIX" to fix the ZONE 3 OUTPUT volume
level to a standard line level.
Output volume I:)UT[::IUT[)()i....
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices: VAR., FIX
• Select "VAR." to adjust the ZONE 2 OUTPUT volume
simultaneously with VOL + on the remote control.
• Select "FIX" to fix the ZONE 2 OUTPUT volume
level to a standard line level.
64