Manual

1
If a warning screen appears
Press ENTER to display detailed information
about the warning.
Press ( / ) to switch between warning messages.
rP,l+P,l+-b-ilq •i
-+ +<JARIIII4G+3>
RESULT
5F' + 5,4/0,, i
DIST: !0,,0'!2,,O.,ci
LUL _ -9.,glz +6,,SdB
?5;E7 C:ANCE]
[ EH]'ER] : EP/te_
<OUT OF PHASE?
Reuel :_e C:i_shne]
FI.
CE]ITER ....
PL F'R
SL SR
5BL SBR
[<]i[::];Setec!
[EHTER] Re!u_ h
W-1 warning screen
For details about each message, see page 29.
• Warnings let yuu know about potential problems detected
during autu setup. Warnings will not cancel the auto setup.
• The number of warnings is displayed to the right uf
"WARNING".
• When the warning is not applicable to a speaker. " -' is
displayed.
When you are finished, press ENTER to
return to the RESULT:EXIT screen.
Continue from step 7 on page 26.
•If yuu change speakers, speaker positions, or the layout of your
listening environment, perform autu setup again to re-calibrate
your system.
• Depending un listening enviromnents. SWFR PHASE:REV
appears in AUTO:CHECK and SUBWOOFER PHASE
parameter in the SETMENU (see page 651 is automatically set
to REVERSE. Tu select the desired setting, change the
SUBWOOFER PHASE parameter in the SETMENU.
• In the DISTANCE results, the distance displayed may be longer
than the actual distance depending un the characteristics of your
subwoofer.
27