Owner`s manual

BASIC SETUP
21
PREPARATION
The basic setup feature is a useful way to set up your
system quickly and with minimal effort.
y
If you wish to configure the unit manually using more precise
adjustments, use the detailed parameters in SOUND MENU
(page 55) instead of using BASIC SETUP.
Altering any parameters in BASIC SETUP will reset all
parameters in SOUND MENU.
Initial settings are indicated in bold for each parameter.
Before you begin:
Press SPEAKERS A or B on the front panel (or press
AMP to select the AMP mode, then press SPEAKERS
A or B on the remote control) to select the front
speakers you want to use.
Make sure you disconnect your headphones from this
unit.
1 Press AMP.
2 Press SET MENU.
“BASIC SETUP” appears in the front panel display.
3 Press ENTER to enter BASIC SETUP.
The ROOM parameter appears in the front panel
display.
4 Press j / i to select the desired setting.
ROOM: S M >L
Select the size of the room you have installed your
speakers in. In general, the room sizes are defined as
follows:
[U.S.A. and Canada models]
S (small) 16 x 13ft, 200ft
2
(4.8 x 4.0m, 20m
2
)
M (medium) 20 x 16ft, 300ft
2
(6.3 x 5.0m, 30m
2
)
L (large) 26 x 19ft, 450ft
2
(7.9 x 5.8m, 45m
2
)
[Other models]
S (small) 3.6 x 2.8m, 10m
2
M (medium) 4.8 x 4.0m, 20m
2
L (large) 6.3 x 5.0m, 30m
2
5 Press d to display the SUBWOOFER
parameter.
6 Press j / i to select the desired setting.
YES
If you have a subwoofer in your system.
NONE If you do not have a subwoofer in your system.
BASIC SETUP
Using the BASIC SETUP menu
MUTE
MENUTITLE
VOLU ME
SET MENU
LEVEL
SRCH MODE
BAND
A-E/CAT. A-E/CAT.
PRESET/CH
STRAIGHT
MOVIEENTERTAINMUSIC
STEREO
4321
8
10
7
09
65
ENT.
DIRECT ST.EXTD SUR.STANDARD
SELECT
NIGHT
B
SPEAKERS
A
DISPLAYRETURN
MEMORY
MUTE INPUT
ENTER
VOL CH
2
3-13
1
AMP
MENU
SET MENU
SRCH MODE
BASIC SETUP
A-E/CAT. A-E/CAT.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
PRESET/CH
ENTER
SUBWOOFER⋅⋅YES