Service manual

RX-V730/RX-V730RDS/RX-V630/RX-V630RDS
HTR-5560/HTR-5560RDS/DSP-AX630/DSP-AX630SE
39
RX-V730/RX-V730RDS/RX-V630/RX-V630RDS
HTR-5560/HTR-5560RDS/DSP-AX630/DSP-AX630SE
TUNER: NOT or EXIST can be selected.
RDS: NOT or EXIST can be selected.
VIDEO FORMAT: NTSC or PAL can be selected.
TUNER
RDS
VIDEO FORMAT
14. MICROPROCESSOR INFORMATION
The version, checksum and the port specified by the
microprocessor are displayed. The signal is processed
using EFFECT OFF. The checksum is obtained by adding
the data at every 8 bits for each program area and
expressing the result as a 4-figure hexadecimal data.
Version / 
Release 1 digit / Main version 2 digit / DSP version 2 digit
Checksum / 
A: All area
Check of port setting for judging microprocessor function

Display of AAC function detection port state

14. マイコン情報








Model type (*2)
Tuner mode 0 (*1)
Tuner mode 1 (*1)
Tuner with (1) / without (0)
RDS with (1) / without (0)
VIDEO format: PAL (1) / NTSC (0)
*1 (Tuner mode)
Tuner mode 1 Tuner mode 0 Tuner frequency
0 0 AM: 531-1611kHz/9kHz FM: 76.0-90.0MHz/100kHz
1 0 AM: 531-1611kHz/9kHz FM: 87.5-108.0MHz/50kHz
0 1 AM: 530-1710kHz/10kHz FM: 87.5-107.9MHz/200kHz
11
R destination, Port6: LOW AM: 530-1710kHz/10kHz FM: 87.5-108.0MHz/100kHz
HIGH AM: 531-1611kHz/9kHz FM: 87.5-108.0MHz/50kHz
)
*2 (Model type)
bit 2 bit 1 bit 0 Model
0 0 0 RX-V430
0 0 1 RX-V530
0 1 0 DSP-AX630
0 1 1 RX-V630
1 0 0 RX-V730