manual

En 53
SETUP
Setting various functions (Setup menu)
■ Generating test tones
Turns the test tone generator on or off.
■ Adjusting the graphic equalizer
1
When “EQ Type Select” is displayed, use
jCursor D / E to select “GEQ” and press
jENTER.
2
Check that “Channel” selects and use jCursor D
/ E to select the speaker for which you want to
adjust the equalizer.
; Equalizer
.Channel;;;;FrontL
63Hz
;;;;;; || ;;;;;; 0dB
160Hz
;;;;;; || ;;;;;; 0dB
400Hz
;;;;;; || ;;;;;; 0dB
1kHz
;;;;;; || ;;;;;; 0dB
2.5kHz
;;;;;; || ;;;;;; 0dB
6.3kHz
;;;;;; || ;;;;;; 0dB
16kHz
;;;;;; || ;;;;;; 0dB
[p]/[[]:Select
Frequency band Setting the volume level for
the selected frequency
Speaker
3
Press jCursor C repeatedly to select the
frequency you want to adjust, then use jCursor D
/ E to adjust the volume.
Raising volume: Press jCursor E.
Lowering volume: Press
jCursor D.
4
When you have finished making adjustments,
press iSETUP to close the Setup menu.
Frequency
range
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
Adjustable
range
-6.0 dB to 0 dB to +6.0 dB
Default setting 0 dB
Adjustment
increments
0.5 dB
You can use jCursor B / C to select another frequency or
return to step 2. Repeat steps 2-3 to adjust the tone to your
liking.
Test Tone
Off (Default) Does not generate test tones.
On Generates test tones. While “On” is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.