Owner’s Manual

Setting the use of a Digital Media Controller

Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital

Media Controller (DMC) is a device that can control other network devices through the

network. When this function is enabled, you can control playback of the unit from

DMCs (such as Windows Media Player 12) on the same network.

Setup menu

“Network” > “DMC Control”

Settings

Disable Does not allow DMCs to control playback.

Enable Allows DMCs to control playback.

Setting the use of the Network Standby function

Selects whether the unit can be turned on from other network devices (network

standby).

Setup menu

“Network” > “Network Standby”

Settings

Off Disables the network standby function.

Enables the network standby function.

(The unit consumes more power than when “Off” is selected.)

Auto

Enables the network standby function.

(If “Network Connection” is set to “Wired”, the unit is set to the power

saving mode when the network cable is disconnected.)

With an advanced energy saving design, this product achieves a low power

consumption of not more than two watts when in Network Standby mode.