Operation Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 92
■ MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
• Operation of the AirPlay function (p.67) or the DMC is not limited by this setting.
Enables/disables the MAC address filter.
Settings
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when “Filter” is set to “On”.
■ Procedure
1
Use the cursor keys (q/w) to select an MAC address number (1 to 10).
2
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
3
To exit from the menu, press SETUP.
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Settings
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
■ Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
■ Network Name
Edits the network name (the unit’s name on the network) displayed on other network
devices.
■ Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
3
To confirm the new name, press ENTER.
4
To exit from the menu, press SETUP.
Filter
Off Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
MAC Address 1–10
Disable Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
Off Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Network Name
Yamaha xxxxxx
Back:RETURN
00_HTR-4067_5067_om_En.book Page 92 Monday, November 18, 2013 12:50 AM