Operation Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 69
Setup menu items
Menu Item Function Page
Speaker
Configuration
Power Amp Assign
(HTR-5066 only)
Selects a speaker system.
71
Subwoofer Selects whether or not a subwoofer is connected. 71
Front Selects the size of the front speakers. 71
Center Selects whether or not a center speaker is connected and its size. 71
Surround Selects whether or not surround speakers are connected and their size. 72
Surround Back
(HTR-5066 only)
Selects whether or not surround back speakers are connected and their size.
72
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 72
Subwoofer Phase Sets the phase of the subwoofer. 72
Extra Bass Sets the speakers to produce the front channel low-frequency components. 72
Distance Sets the distance between each speaker and listening position. 73
Level Adjusts the volume of each speaker. 73
Equalizer Adjusts the tone with an equalizer. 73
Test Tone Enables/disables the test tone output. 73
HDMI Configuration
HDMI Control Enables/disables HDMI Control. 74
Audio Output Selects a device to output audio. 74
Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 74
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 74
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 75
ARC Enables/disables ARC. 75
SCENE Enables/disables SCENE link playback. 75