User Manual

ManualsBrandsYamaha ManualsOtherHTR-4066

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this

document.

• Speaker cables (depending on the number of speakers)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1)

(not required if your TV supports ARC [Audio Return Channel])

1 Preparation

Accessories

 Remote control  Batteries

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

 AM antenna  FM antenna  YPAO microphone

 CD-ROM

(Owner’s Manual)

 Safety Brochure  Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the HTR-5066 (U.S.A.

model), unless otherwise specified.

*The supplied FM antenna

varies depending on the

region of purchase.

Cables required for connections

Easy Setup Guide

English

AV Receiver

This document explains how to set up a 5.1- or 7.1-channel system

(HTR-5066 only) and play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is

supplied on CD-ROM. For more information about this product, refer to the

Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the

following website.

http://download.yamaha.com/

[For U.S. customers only]

Visit the following website for additional information, FAQ’s, downloads such as

“Owner’s Manual” and product updates.

http://usa.yamaha.com/support/

UAB

Summary of content (8 pages)

PAGE 1
UAB 1 Preparation AV Receiver Accessories Check that the following accessories are supplied with the product. Remote control Easy Setup Guide Insert the batteries the right way round. AM antenna English To reduce the impact on natural resources, the Owner’s Manual for this product is supplied on CD-ROM. For more information about this product, refer to the Owner’s Manual on the supplied CD-ROM. PDF versions of this guide and “Owner’s Manual” can be downloaded from the following website.
PAGE 2
Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.
PAGE 3
Connecting speakers/subwoofer • (U.S.A. model only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. 2 Connect the center speaker (3) to the CENTER terminal. The unit (rear) • (Except for U.S.A. model) Use speakers with an impedance of at least 6 Ω.
PAGE 4
3 Connect the surround speakers (4/ 5) to the SURROUND (//\) terminals. 4 Connect the subwoofer (9) to the SUBWOOFER PRE OUT jack. • Use a subwoofer equipped with built-in amplifier. The unit (rear) The unit (rear) SPEAKERS SPEAKERS PB CENTER Connect the surround back speakers (6/ 7) to the SURROUND BACK (//\) terminals. The unit (rear) SPEAKERS PB FRONT For 7.
PAGE 5
4 Connecting external devices Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. TV Audio out (optical) HDMI in HDMI out HDMI HDMI BD/DVD player OPTICAL HDMI O HDMI OUT jack a b Connect a TV to the unit with the other HDMI cable. VOLTAGE SELECTOR (General model only) VOLTAGE SELECTOR c Connect a TV to the unit with a digital optical cable.
PAGE 6
5 Optimizing the speaker settings automatically (YPAO) 1 The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. Connect the YPAO microphone to the YPAO MIC jack on the front panel. The following screen appears.
PAGE 7
If “W-1:Out of Phase” appears • If the cursor keys do not work, press SOURCE/RECEIVER (to light up the key in orange) and then use the cursor keys. • If any error message (such as E-1) or warning message (such as W-2) appears, see “Error messages” or “Warning messages” in “Owner’s Manual”. • If the warning message “W-1:Out of Phase” appears, see “If “W-1:Out of Phase” appears”. Follow the procedure below to check the speaker connections.
PAGE 8
6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 Press HDMI 1 to select “HDMI 1” as the input source. VOL. HDMI1 CODE SET L SL SW C R SR SOURCE RECEIVER HDMI 1 2 3 4 HDMI 1 MHL 1 2 3 5 A AV 4 5 6 V-AUX USB NET 2 3 Press STRAIGHT repeatedly to select “STRAIGHT”. VOL. FM AM MEMORY MOVIE MUSIC PRESET STRAIGHT TUNING SUR.