manual

En 74
APPENDIX
Troubleshooting
AM
iPod™/iPhone™
Problem Cause Remedy
See
page
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak, or the antenna
connections are loose.
Adjust the AM loop antenna orientation. 22
Use the manual tuning method. 34
Automatic station
preset does not
work.
Automatic station preset is not
available for AM stations.
Use manual station preset. 34
Continuous
crackling and
hissing noises are
heard.
The supplied AM loop antenna is
not connected.
Connect the AM loop antenna correctly
even if you use an outdoor antenna.
22
The noises may be caused by
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
22
Buzzing and whining
noises are heard.
A TV set is being used nearby. Move this unit away from the TV set. —
Display Cause Remedy
See
page
Loading... The unit is in the process of
recognizing the connection with
your iPod/iPhone.
—
The unit is in the middle of
acquiring song lists from your
iPod/iPhone.
—
Connect error There is a problem with the signal
path from your iPod/iPhone to the
unit.
Turn off the unit and reconnect the Yamaha
iPod universal dock to the DOCK jack of
the unit.
39
Remove your iPod/iPhone from the Yamaha
iPod universal dock and then place it back in
the dock.
39
Unknown iPod The iPod/iPhone being used is not
supported by the unit.
Connect an iPod/iPhone supported by the
unit.
—
iPod connected Your iPod/iPhone is properly
placed in the Yamaha iPod
universal dock.
—
Disconnected Your iPod/iPhone is removed from
the Yamaha iPod universal dock.
—
Unable to play The unit cannot playback the
songs currently stored on your
iPod/iPhone.
Check that songs are currently stored on
your iPod/iPhone.
—