manual

En 51
SETUP
Setting various functions (Setup menu)
■ Controlling the volume of each speaker
Separately adjusts the volume of each speaker. Use jCursor B / C
to select the desired speaker and adjust the volume with jCursor
D / E.
■ Manually setting speaker distance
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
Use jCursor B / C to display “Unit,” and then use jCursor
D / E to choose the units of length (meters or feet).
Setting distances for each speaker
Use jCursor B / C to display the speaker you want to configure,
and then use jCursor D / E to set the distance from the speaker
to your listening position.
■ Adjusting sound quality with the equalizer
Adjusts sound quality of tone using a parametric or graphic
equalizer.
EQ Select
Select an equalizer type.
Level
FL Front speaker L
FR Front speaker R
C Center speaker
SL Surround speaker L
SR Surround speaker R
SBL Surround back L
SBR Surround back R
SB J1 Surround back
SWFR Subwoofer
Adjustable range -10.0 dB to +10.0 dB
Default setting 0 dB (FL/FR/SWFR)
-1.0 dB (C/SL/SR/SBL/SBR/SB)
Adjustment
increments
0.5 dB
Distance
Unit Selects the distance unit (meters or feet).
Front L Front speaker L
Front R Front speaker R
Center Center speaker
Sur. L Surround speaker L
Sur. R Surround speaker R
Sur. B L Surround back speaker L
Sur. B R Surround back speaker R
Sur. B J1 Surround back speaker
SWFR Subwoofer
Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)
Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR)
2.60 m (8.5 ft) (Center)
2.40 m (8.0 ft) (Sur. L/Sur. R/Sur.B L/Sur.B R/Sur.B)
Adjustment
increments
0.10 m (0.5 ft)
Equalizer
PEQ Uses the parametric equalizer to adjust sound quality.
Selecting this setting applies the tone settings
obtained using YPAO (☞p. 23). J2
GEQ (Default) Uses the graphic equalizer to adjust sound quality. By
pressing jENTER, you can adjust the
characteristics of the graphic equalizer.
Off Disables the equalizer.
JJ
1 : “SB” and “Sur.B” is displayed when using a 6.1 channel configuration only.
J
2 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically.
“PEQ” does not appear if the measurement process has not been carried out at
least once.