User Manual

20

Adjusting the tonearm height
If the tonearm and the record are not in parallel when you
lowerthestylusontotherecord,youwillneedtoadjust
thetonearmheight.Followthestepsbelow:
1
Return the tonearm to the arm rest and
set it securely in position.
2
Use the hexagonal wrench to loosen
the VTA adjustment screw.
VTA adjustment screw
NOTICE
ThetonearmissecuredbytheVTA
adjustmentscrew.Beforelooseningthescrew,
gently support the entire tonearm with your
hand so that it will not fall.
3
Move the tonearm up and down to
adjust its height so that the tonearm
and record will be in parallel.
4
Use the hexagonal wrench to tighten
the VTA adjustment screw and secure
the tonearm.