User Guide

13
Setup
• See the G50 owner’s manual for G50 setup and
operation details.
• The multi-pin cable plug release button must be
pressed when unplugging the multi-pin cable from
the G1D.
G
U
ITAR M
ID
I
CONVERTER
DIVIDED
2. Unplug cable by gripping the puing firmly.
1. Press release button.
3. Turn on the G50.
When the G50 power is turned ON, the G1D
power indicator should light indicating that it is
receiving power from the G50.
4. Play.
Assuming that your G50, tone generator, and
other equipment are set up properly (refer to the
appropriate owner’s manuals for details), you’re
now ready to play.