Owner`s manual

PERIODIC MAINTENANCE AND MINOR REPAIR

6-39

EAU04226

Replacing a headlight bulb

This motorcycle is equipped with two

quartz bulb headlights. If a headlight

bulb burns out, replace it as follows.

1. Remove panel B. (See page 6-9

for panel removal and installation

procedures.)

2. Disconnect the headlight coupler,

and then remove the bulb cover.

3. Unhook the headlight bulb holder,

and then remove the defective

bulb.

EW000119

WARNING

Headlight bulbs get very hot. There-

fore, keep flammable products away

from a lit headlight bulb, and do not

touch the bulb until it has cooled

down.

4. Place a new headlight bulb into

position, and then secure it with

the bulb holder.

1. Headlight bulb cover

2. Headlight coupler

1. Headlight bulb holder 1. Do not touch the glass part of the bulb.

U5LV12.book Page 39 Thursday, June 27, 2002 5:49 PM