User Manual

36
DTX-PRO Owner’s Manual
Changing the Drum Set Sound (Building Your Own Drum Set)
Basic Guide
2.
Strike the drum pad for which you wish to
change the settings.
The pad name appears on the upper right corner of the
screen.
3.
Use the buttons below “ ” and “ ” ([F1]
and [F2]) to select the item.
The first page:
The Inst Selection screen appears.
The second page:
The Inst Setting screen appears.
The items shown on the second page or the Inst settings screen depend on the Inst category selected in the first page or
the Inst selection screen.
4.
Use the [–] [+] controllers to change the
parameter value.
Inst Category
Parameter
Value
Adjusting the parameter value to:
Kick1
Kick2
Snare1
Snare2
To m 1
To m 2
Tuning Determines the tuning (pitch).
Muffling Simulates the effect of changing the degree of muffling (or how much the
drum head is muted)
Cymbal1
Cymbal2
Size Simulates the effect of changing the cymbal size.
Sustain Determines the cymbal’s sustain time (i.e., how quickly the sound decays
to silence).
HiHat1
HiHat2
Size Simulates the effect of changing the cymbal size.
Clutch Simulates the effect of changing the hi-hat’s clutch position. The smaller
the setting, the quicker an open hi-hat sound will decay to silence.
Perc (Percussion)
Effect
User
Tuning Determines the tuning (pitch).
Decay Determines how quickly the sound decays to silence.
Inst Category
name
Inst number
and Inst name
Settings (differ-
ent items appear
depending on the
Inst category)
NOTE
Hi-Hat Clutch setting is applied to all Kits.
or