User Manual

14
DTX-PRO Owner’s Manual
Setup Guide
This provides information on setup and initial settings in preparation for playing.
This completes set up.
First, install the DTX-PRO.
There are three different ways of installation as shown below.
 Attach the DTX-PRO onto the rack of your drum kit. (For more information, refer to the Assembly Manual.)
 Use the included module holder (page 6) to attach the standard drum hardware. (See “Integrating Electronic &
Acoustic Drums” on page 59.)
 Place on a flat surface
After installing the DTX-PRO, connect cables to the Pads. For more information on the connections, refer to the specific
Assembly Manual of your drum kit.
Preparations
Workflow
Installing the DTX-PRO
Connecting the AC adaptor
Connecting Headphones
Turning On
Initial Setup (Trigger Setup Wizard)
Installing the DTX-PRO