Music Synthesizer Models EX5, EX5R, EX7 Owner's Manual 4th Edition
14
Introductory
Section
CAUTION
ATTENTION
WARNING
:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
POWER
ON
OFF
AC INLET
INDIVIDUAL OUTPUT
A/D
INPUT
6543
OUTPUT
R L MONO
FOOT
SWITCH
FOOT
CONTROLLER
FOOT
VOLUME
SUSTAIN
DIGITAL OUTPUT WORD CLOCK IN
AES EBU
SCSI
MIDI A
OUTTHRU IN
BREATH PHONES
CAUTION
ATTENTION
WARNING
:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
POWER
ON
OFF
AC INLET
EX5
EX7
ª
A/D INPUT L/MONO and
R Jacks (A/D INPUT on the EX7)
Line and microphone sampling
sources can be connected to these
jacks. Line or microphone input
sensitivity is switched via the
“line/mic” parameter in the Sample
mode REC display (page 176), and
fine input sensitivity adjustment
can be carried out via the A/D
GAIN control on the control panel.
➡
See page 70 for more
information.
•
INDIVIDUAL OUTPUT 1 and
2 Jacks (EX5 and EX5R only)
In addition to the stereo OUTPUT
L/MONO and R jacks, the EX5 and EX5R
initially have two individual outputs: the
INDIVIDUAL OUTPUT 1 and 2 jacks.
Individual “parts” of a performance setup
can be assigned to different individual
outputs via the PERFORMANCE EDIT
mode PART display (see page 164). Four
individual outputs can be added to the
EX5, EX5R, and EX7 by installing the
optional EXIDO1 Individual Output
Board (page 19.)
§
[POWER] Switch
Press to turn power ON
or OFF. The EX5 and
EX7 power switch is
located on the rear panel
near the AC power cord
socket. The EX5R power
switch is located on the
front panel.
‚
MIDI IN, OUT and THRU Connectors
The MIDI IN connectors receive data from an external sequencer or
other MIDI device which is to control or transmit data to the EX. The
MIDI THRU connector simply re-transmits the data received at the MIDI
IN connector, allowing convenient chaining of MIDI devices. The MIDI
OUT connectors transmit data corresponding to all EX performance and
playback operations.
The EX5 is equipped with two sets of MIDI terminals: MIDI A and MIDI
B. The MIDI A group includes MIDI IN, OUT, and THRU terminals,
while the MIDI B group only has MIDI IN and OUT terminals.
➡
See page 22 for more information.
¶
AC Power Cord Socket
Be sure the plug the AC power cord
into this socket before plugging the
power cord into an AC outlet.
Use only the AC power cord
supplied with the EX5, EX5R, or
EX7. If the supplied cord is lost or
damaged ands needs to be replaced,
contact your Yamaha dealer. The
use of an inappropriate replacement
can pose a fire and shock hazard!
§ ¶
‚
fifl
›‡‹¤⁄ª
* • is not available on EX7.
Rear Panel
Intro/E/qx 5/21/98 11:27 AM Page 14