Owner`s manual

ELB-01 Owner’s Manual
143
Music Data Recorder (MDR)
6
Insert the floppy disk that containing the song you want to
convert to the ELB format, and insert the USB flash memory
device for use as the destination.
Press the [MDR] button, then select the song you want to convert
to ELB format.
See steps 2 and 3 on page 112 for instructions on selecting songs.
Use the PAGE buttons to select the Convert display (Page 7).
Press the [B] button corresponding to [EXE] (Execute) in the
display.
The Convert Destination display appears.
Select the blank song as the destination in the USB flash memory
device.
Press the [D] button corresponding to [EXE] (Execute) in the
display.
A message appears prompting confirmation of operation. You can cancel the
operation at this point by pressing the [D] button.
Press the [C] button corresponding to [Convert] in the display to
start conversion.
After conversion is finished, the LCD returns to the Convert display.
1
2
3
4
<CONV>:ELB [EXE] ‡
E001:SONG 1
<CONV DEST> [˜] ‡
¿ ___:new song [EXE]
5
6
7