Owner`s manual

30
Basic Operation
1 Select the desired parameter.→P.30
4 Uniform the targeted parameter
value(s) to that of the registration at the
cursor position.→P.32
5 Offset the targeted parameter value(s).
→P.33
2 Select the appropriate registration that contains the parameter value you want to use it as
the master.→P.31
3 Select the targeted registration numbers that contain the parameter value you want to
change by turning on/off them.→P.31
UNIFORM and REGISTRATION SELECT
214 35
1 PARAM(Parameter)
Selects the parameter you want to change its amount.
Available parameters are as follows:
Each press of the down arrow Data Control button selects the parameters in
order. Reverb Length is always selected when the Electone is turned on.
● Parameters
Related to Reverb settings:
Reverb Length
Reverb Depth
UK1 Reverb
UK2 Reverb
LK1 Reverb
LK2 Reverb
Lead1 Reverb
Lead2 Reverb
PK1 Reverb
PK2 Reverb
U.Flute Reverb
L.Flute Reverb
Percussion Reverb
Accompaniment Reverb
Related to Sustain settings:
UK Sustain
LK Sustain
PK Sustain
Related to Pan settings:
UK1 PAN
UK2 PAN
LK1 PAN
LK2 PAN
Lead1 PAN
Lead2 PAN
PK1 PAN
PK2 PAN
Related to Volume settings:
UK1 Volume
UK2 Volume
LK1 Volume
LK2 Volume
Lead1 Volume
Lead2 Volume
PK1 Volume
PK2 Volume
U.Flute Volume
L.Flute Volume
Percussion Volume
Accompaniment Volume
Related to Brilliance settings:
UK1 Brilliance
UK2 Brilliance
LK1 Brilliance
LK2 Brilliance
Lead1 Brilliance
Lead2 Brilliance
PK1 Brilliance
PK2 Brilliance