Owner`s manual

Appendix
10
ELB-01 Owner’s Manual
167
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Installing the Floppy Disk Drive
The optional UD-FD01 floppy disk drive can be installed
to the bottom of the instrument by using the included
floppy disk drive case and screws. Have a Phillips-head (+)
screwdriver ready.
Remove the three backing papers from the
adhesive tape in the case, and fit the floppy
disk drive into the case.
Fold the USB cable inside the case as
shown.
Attach the drive and case assembly to the
right underside of the instrument, using the
included four screws (4 mm x 10 mm).
Connect the USB cable to the [USB TO
DEVICE B] terminal.
Installing Optional Hardware
1
Dual-sided
adhesive tape
2
3
4