Owner`s manual

ELB-01 Owner’s Manual
117
Music Data Recorder (MDR)
6
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Recording
Before recording, set up the Electone just as you’ll need it for the entire recording. Set
the desired Registrations you’ll use throughout the performance/recording in
Registration Memory and make sure also to select the Registration that you will use at
the beginning of the song
Insert the media into the USB TO DEVICE terminal.
Select the blank song (new song) for recording your
performance.
For details on selecting a song, see steps 2 and 3 on page 112.
Press the [RECORD] button.
The lamp above the [RECORD] button lights, indicating that the Electone is
ready to record.
You can cancel the operation at this point by pressing the [STOP] button.
Press the [PLAY/PAUSE] button.
The lamp above the [PLAY/PAUSE] button lights up and a small arrow
indicator flashes across from left to right at the top right of the LCD display.
This indicates that the M.D.R. is reading the registrations.
After “REC~~” appears at the top right of the LCD display, begin
playing.
Files in the song
4
Recording
File Explanation Extension
Performance
data
This file contains performance data, played on the
keyboards and pedals of the Electone.
.mid
Registration
data
This file contains Registration settings, User Voices, User
rhythms, and Rhythm Sequences.
.b00
XG-converted
data
This file contains XG song data, for which Electone
performance data is converted to XG-compatible format.
.mid
1
2
NOTE
When you record the song
using the Next Regist
function, make sure to press
the [PLAY/PAUSE] button
before pressing the
[RECORD] button. For
details, see page 129.
ÃUSB 01 [˜] ⁄
¿ ___:new song
3
4
5