User Guide

47
(1) Turning on the Tremolo effect (set to standby):
Before you can switch Tremolo on and off in real time, you must first
turn the effect on in the various voice sections. This doesn’t actually
start the effect, but merely puts Tremolo in a “standby” condition.
Tremolo can be applied selectively to the voice sections; in other words,
the Upper Keyboard voices can have the Tremolo effect while the Lead
voices have another effect or no effect at all.
■ For Lead, Upper, Lower and Pedal (Voice Menu) voices
Press the desired voice button on the panel twice, then select
Tremolo.
Selecting TREM. turns on Tremolo for the selected Voice
section (or the currently assigned voice group).
■ For Flute Voices
Press the U. FLUTE VOICE button and/or L. FLUTE VOICE
button in the DISPLAY SELECT section, then select the VOL
page.
Selecting ON turns on Tremolo for the current Flute Voice.