User Guide

Voice Sections
2
19
2
Press one of the Data Control buttons that corresponds to the voice you
wish to select. (Pop Organ 1, in this case)
DATA CONTROL DATA CONTROL
Organ1 JazzOrgan1
PopOrgan1 Accordion
The first letter of the selected voice/rhythm will start blinking. You
have selected Pop Organ 1 for the Upper Keyboard Voice 1.
3
If you wish to, you can select voices from the other Upper Keyboard
Voice sections, Upper Keyboard Voice 2 and Lead Voice, Lower
Keyboard Voice sections and Pedal Voice sections, following steps #1
and #2 above.
NOTE:
The voices, Upper Keyboard Voice 2,
Lower Keyboard Voice 2 and Pedal Voice
2, is selectable using the Dotted buttons.
The detail is shown on page 21.
4
Set the volume for each voice section.
There are two volume controls:
Coarse:
Use the VOLUME controls of each voice section on the panel to set the
desired level for each voice. The controls have seven volume settings,
from a minimum of 0, or no sound, to a maximum of full volume.
UPPER KEYBOARD VOICE 1
UPPER KEYBOARD
VOICE 2
MAX
MIN
MAX
MIN
STRINGS BRASS CLARI-
NET
SAXO-
PHONE
CHORUS HARMO-
NICA
1
ORGAN PIANO GUITAR VIBRA-
PHONE
COSMIC TUTTI
2
1
2
Fine:
Pressing the same panel voice button again (or the same Data Control
button corresponding to the selected voice) calls up the Voice
Condition display. Use the Page buttons to select page 2, which
contains Volume setting.
DATA CONTROL DATA CONTROL
INIT.T: 8 T.V:OFF¨1⁄
AFT.T: 8 FEET:PRESET
PAGE