Specifications

83
Voice Edit
7
SAVE Page
PAGE
2
Press the Data Control button that corresponds to the User voice
number you wish to save to.
2 Saving Your New Voice
Once you have created a sound you are satisfied with, you'll want to
save that sound for future use.
To save your newly created voice:
1
Use the Page buttons to select the SAVE page.
The following display appears.
This operation automatically erases
any voice that have been previously
saved to the selected User voice
number. You should check the User
voices (page 23) before saving a voice
to make sure that you will not be
erasing any important voices.
NOTE:
The on/off status cannot be saved. If
you want an Operator muted, set the
OL parameter of the selected Operator
to the minimum.
.
The following display appears, prompting confirmation of the
operation. (Saving a new voice automatically erases the voice
previously stored to the selected User number.)
3
Press any of the Data Control buttons below “OK” to save the
voice, or press any of the buttons below “Cancel” to abort the
operation.
When the voice has been saved, the message “Completed!!”
temporarily appears.
This Save page shows the same voices as the last page (USER) of
the dotted buttons' Voice Menu.