Specifications

93
2
Saving Your New Voice
Once you have created a sound you are satisfied with, you'll want to
save that sound for future use.
To save your newly created voice:
1
Use the Page buttons to select the SAVE page.
The following display appears.
SAVE Page
2
Press the Data Control button that corresponds to the User voice
number you wish to save to.
The following display appears, prompting confirmation of the
operation. (Saving a new voice automatically erases the voice
previously stored to the selected User number.)
3
Press any of the Data Control buttons below "OK" to save the
voice, or press any of the buttons below "Cancel" to abort the
operation.
When the voice has been saved, the message "Completed!!"
temporarily appears.
This Save page shows the same voices as the last page (USER)
of the dotted buttons' Voice Menu.
This operation automatically erases any
voice that had been previously saved to
the selected User voice number. You
should check the User voices (see page
27.) before saving a voice to make sure
that you will not be erasing any important
voices.
NOTE:
The on/off status cannot be saved. If you
want an Operator muted, set the OL
parameter of the selected Operator to the
minimum.